Transition Networks 10/100BASE-TX to 100BASE-FX Media Converter
Mfg # SPOEB1011-100
CDW # 1043660
| UNSPSC 43201553
Quick tech specs
- 10/100BASE-TX (RJ-45) 100 m/328 ft. to 100BASE-FX 1300nm multimode (ST) 2 km/1.2 miles AC powered PoE media converter
Know your gear
Transition's AC powered PoE media converters combine data received over a fiber optic link with -48VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE802.3af™: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input.
This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities.
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize.
The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs of the MDI.
Features:
External AC power supply
IEEE 802.3af Power Over Ethernet compatible
48 VDC PSE output voltage
Signal Pair Power Insertion
PD Detection Signature
Over-Current Protection & Under-Current Detection
Powered Device Reset
Minimum Load Sensing
Fault Protection Input
Auto-Negotiation (802.3u):
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
AutoCross™:
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Link Pass Through:
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
Far End Fault (FEF):
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
Automatic Link Restoration:
Transition Networks's converters will automatically re-establish link in all network conditions.
This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities.
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize.
The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs of the MDI.
Features:
External AC power supply
IEEE 802.3af Power Over Ethernet compatible
48 VDC PSE output voltage
Signal Pair Power Insertion
PD Detection Signature
Over-Current Protection & Under-Current Detection
Powered Device Reset
Minimum Load Sensing
Fault Protection Input
Auto-Negotiation (802.3u):
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
AutoCross™:
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Link Pass Through:
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
Far End Fault (FEF):
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
Automatic Link Restoration:
Transition Networks's converters will automatically re-establish link in all network conditions.