Know your gear
Features:
-Cable meets NEC® requirements and is listed as Type OFNR and CSA FT-4.
-Cable features two 900-µm TBII® buffered fibers surrounded by aramid yarn strength members with a flame-retardant jacket.
-Provides total immunity to electrical interference.
-Ceramic connectors provide low signal loss, high reliability, and long life.
-Ideal for storage area networks, high-speed parallel optics interconnects, and other high-speed, high-capacity interconnect applications.
Specifications:
Attenuation (Maximum) — Maximum: 3.5 dB/km at 850 nm, 1.5 dB at 1300 nm;
Typical: 3 dB/km at 850 nm, 1 dB at 1300 nm
Bandwidth — 500 MHz/km at 850 nm; 500 MHz at 1300 nm
Bend Radius (Minimum) — Loaded: 5 cm (2 in.);
Installed: 3 cm (1.2 in.)
Buffering Diameter — 900 µm
Cladding Diameter — 125 µm
Core Diameter — 50 µm
Connector Durability — ≤ 0.2 dB change, 1000 rematings, FOTP-21
Connector Tensile Strength — ≤ 0.2 dB change, 20 lb. FOTP-6
Ferrule — Ceramic
Fiber Count — 2
Fiber Type — Multimode (2.8 x 5.6 mm)
Outer Diameter (Nominal) — 0.11“ x 0.22“
Operating Temperature — -4 to +158° F (-20 to +70° C)
Standards — NEC® OFNR, CSA FT-4, UL® 1666 flame resistance for riser and general buidling applications
Tensile Load (Maximum) — Short Term: 1000 N (225 lb./ft.);
Long Term: 480 N (108 lb./ft.)
Weight — 9.4 lb./1000 ft. (14 kg/km)
-Cable meets NEC® requirements and is listed as Type OFNR and CSA FT-4.
-Cable features two 900-µm TBII® buffered fibers surrounded by aramid yarn strength members with a flame-retardant jacket.
-Provides total immunity to electrical interference.
-Ceramic connectors provide low signal loss, high reliability, and long life.
-Ideal for storage area networks, high-speed parallel optics interconnects, and other high-speed, high-capacity interconnect applications.
Specifications:
Attenuation (Maximum) — Maximum: 3.5 dB/km at 850 nm, 1.5 dB at 1300 nm;
Typical: 3 dB/km at 850 nm, 1 dB at 1300 nm
Bandwidth — 500 MHz/km at 850 nm; 500 MHz at 1300 nm
Bend Radius (Minimum) — Loaded: 5 cm (2 in.);
Installed: 3 cm (1.2 in.)
Buffering Diameter — 900 µm
Cladding Diameter — 125 µm
Core Diameter — 50 µm
Connector Durability — ≤ 0.2 dB change, 1000 rematings, FOTP-21
Connector Tensile Strength — ≤ 0.2 dB change, 20 lb. FOTP-6
Ferrule — Ceramic
Fiber Count — 2
Fiber Type — Multimode (2.8 x 5.6 mm)
Outer Diameter (Nominal) — 0.11“ x 0.22“
Operating Temperature — -4 to +158° F (-20 to +70° C)
Standards — NEC® OFNR, CSA FT-4, UL® 1666 flame resistance for riser and general buidling applications
Tensile Load (Maximum) — Short Term: 1000 N (225 lb./ft.);
Long Term: 480 N (108 lb./ft.)
Weight — 9.4 lb./1000 ft. (14 kg/km)