Crestron DIN Rail High-Voltage Switch
Mfg # DIN-8SW8
CDW # 1894179
Quick tech specs
- 8 channels of power switching
- Override input
- Supports 120 to 240 Volt 50/60 Hz
Know your gear
DIN Rail High-Voltage Switch, 8 feeds, 8 channels
The DIN-8SW8 is an 8-channel lighting control module designed to support switching of non-dimmable lighting and fans. A single model supports both 120 and 220-240 Volt applications. Each channel handles incandescent loads up to 10 Amps, fluorescent loads up to 5 Amps, and also 1/2 HP motors.
Override InputAn override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel, or remotely via software.
DIN Rail Installation
The DIN-8SW8 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-8SW8's front panel stays accessible while the connections are concealed.
Cresnet
The DIN-8SW8 communicates with a DIN-AP2 2-Series Automation Processor, or other Crestron 2-Series control system, via the Cresnet control network. A pair of Cresnet ports is provided on the DIN-8SW8 allowing for easy daisy-chaining of several DIN Rail Series automation control modules.
Key Features
8 channels of power switching
Supports 120 to 240 Volt 50/60 Hz
Override input
Cresnet communications
Setup via front panel or software
Programmable functionality via DIN-AP2
9M wide DIN rail mounting
Override InputAn override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel, or remotely via software.
DIN Rail Installation
The DIN-8SW8 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-8SW8's front panel stays accessible while the connections are concealed.
Cresnet
The DIN-8SW8 communicates with a DIN-AP2 2-Series Automation Processor, or other Crestron 2-Series control system, via the Cresnet control network. A pair of Cresnet ports is provided on the DIN-8SW8 allowing for easy daisy-chaining of several DIN Rail Series automation control modules.
Key Features
8 channels of power switching
Supports 120 to 240 Volt 50/60 Hz
Override input
Cresnet communications
Setup via front panel or software
Programmable functionality via DIN-AP2
9M wide DIN rail mounting