C2G 6ft USB to DB25 Serial RS232 Adapter Cable

Mfg.Part: 22429 | CDW Part: 358707 | UNSPSC: 43201404
Availability: In Stock
Warranties
Advertised Price
Better Together
C2G 6ft USB to DB25 Serial RS232 Adapter Cable
Quick View
Total Price:

Product Overview

Easily convert your DB25 serial device to USB
The USB to Serial Adapter from C2G provides the connection between USB and the traditional RS-232 serial port. Designed for high-speed serial transfer up to 115.2K, allowing for use with all of your favorite serial devices including modems, digital cameras, POS etc. Since the adapter uses no IRQs, it is perfect if you need many serial devices attached to your PC.
  • Connectors: USB A to DB25 Male
  • Attached 6ft cable for easy placement
  • Connect directly to USB port on computer or to a USB hub
  • Fully complaint with USB 1.1 specifications
  • Supports baud rates from 1200 to 115.6K
  • Works with modems, ISDN-TA modems, digital cameras, barcode readers, Palm III and V, tablets, label writers, fingerprint verifications, security systems, and POS equipment

C2G 6ft USB to DB25 Serial RS232 Adapter Cable is rated4.43 out of5 by14.
Rated 5 out of 5 by from It works!! I will buy it again.I use it to connect instrument with RS232 connection
Date published: 2009-06-11T00:00:00-04:00
Rated 5 out of 5 by from PerfectVery good product for very competetive price
Date published: 2009-10-06T00:00:00-04:00
Rated 5 out of 5 by from Works well after modificationI bought this cable to go between a Kantronics 3 Plus TNC and my laptop. The D25 end of the cable has lugs that have to be wrestled off before it will fit on the TNC. It was not easy. It would be helpful if the lugs were made to be removed more easily.
Date published: 2011-02-03T00:00:00-05:00
Rated 5 out of 5 by from 6ft USB Serial DB25 Adapter CableI upgraded my computer to one with no serial ports.I was getting FIFO errors although FIFO was turned off. Downloaded the driver in support dated 3-5-13 the problem was fixed.
Date published: 2013-03-25T00:00:00-04:00
Rated 5 out of 5 by from Shipped on time, worked fine.No cons. Wish list would include having software configure to given com ports, instead of through Windows (Admin permission problem on windows vs. software setups.) Still product did exactly as it was advertised, and my small COM port problem is fixed!
Date published: 2012-03-14T00:00:00-04:00
Rated 5 out of 5 by from Product worked as expectedProduct used to connect a mill machine to a PC.
Date published: 2016-11-03T00:00:00-04:00
Rated 5 out of 5 by from Exactly what we needed!Thanks!
Date published: 2011-01-04T00:00:00-05:00
Rated 5 out of 5 by from Exactly what I neededNow my wife can use her sewing machine software with our older computer.
Date published: 2011-01-29T00:00:00-05:00
Rated 5 out of 5 by from Works as AdvertisedUsed this cable as a communication bridge from my SMDR port on our Nortel Phone equipment to our Network Server for phone auditing/report generating capabilities. The cable works as advertised. I had an issue with the DB25-side securing screws - they prevented me from securing the DB25 side down into the SMDR port so I used a hacksaw and sawed them off to make the interface bezel flush and allow it to seat properly. This is in no-way a negative aspect of the product as I am using this cable to fulfill a purpose slightly outside of its original scope.
Date published: 2009-05-04T00:00:00-04:00
Rated 5 out of 5 by from Adapter Cable worked great on W8!Needed this adapter cable to connect my Laptop running W8 to a Kantronics KPC-3 Plus TNC. Since the adapter cable D25 Connector comes with lugs, had to remove the lugs on the back of the TNC before I could install.
Date published: 2012-11-08T00:00:00-05:00