Corning CCH-03U - patch panel housing - 3U - 19"/23"
Mfg # CCH-03U
CDW # 713222
Know your gear
Corning Cable Systems' Closet Connector Housings (CCHs) provide interconnect or cross-connect capabilities between the outside plant, riser, or distribution cables, and the opto-electronics.
The units can be rack-mounted in 19-in (48 cm) or 23-in (58 cm) equipment racks (1.75-in EIA hole spacing) and are available in three-rack-space (6 panels) or four-rack-space (12 panels) versions. For installations requiring 144 fibers, the capacity can be achieved using SC simplex, SC duplex, LC and MT-RJ connectors for 12 fibers per panel in conjunction with the 4-rack-space housing. For installations requiring up to 288 fibers, the capacity can be achieved using LC and MT- RJ connectors for 24 fibers per panel in conjunction with the 4-rack-space housing.
Closet Connector Housings can be ordered with connector panels for multimode and single-mode applications. Connector panels are offered in 6-, 8-, 12-, 16- and 24-fiber configurations. Documentation labels are provided and units or components can be added as needed to construct a fiber distribution frame for any application. The CCH has been designed with an open top, located in the front of the housing in the 3-and 4-rack-space versions of the design. The opening, when used in conjunction with the Closet Jumper Management Panel (CJP), facilitates jumper routing.
The units can be rack-mounted in 19-in (48 cm) or 23-in (58 cm) equipment racks (1.75-in EIA hole spacing) and are available in three-rack-space (6 panels) or four-rack-space (12 panels) versions. For installations requiring 144 fibers, the capacity can be achieved using SC simplex, SC duplex, LC and MT-RJ connectors for 12 fibers per panel in conjunction with the 4-rack-space housing. For installations requiring up to 288 fibers, the capacity can be achieved using LC and MT- RJ connectors for 24 fibers per panel in conjunction with the 4-rack-space housing.
Closet Connector Housings can be ordered with connector panels for multimode and single-mode applications. Connector panels are offered in 6-, 8-, 12-, 16- and 24-fiber configurations. Documentation labels are provided and units or components can be added as needed to construct a fiber distribution frame for any application. The CCH has been designed with an open top, located in the front of the housing in the 3-and 4-rack-space versions of the design. The opening, when used in conjunction with the Closet Jumper Management Panel (CJP), facilitates jumper routing.