Transition Networks Stand-Alone Power over Ethernet (PoE+) PSE - fiber media converter - 10Mb LAN, 100Mb LAN, GigE
Mfg # SGPAT1013-100-NA
CDW # 3265943
| UNSPSC 43201553
Quick tech specs
- Fiber media converter
- 10Base-T
- 100Base-TX
- up to 1800 ft
- GigE
- 1000Base-SX
- RJ-45 / SC multi-mode
- 850 nm
Know your gear
The Power over Ethernet (PoE+) PSE is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which allows two different types of network segments to be connected easily and affordably while also injecting PoE+ power through the copper RJ-45 port.
PoE allows for the transmission of power over the same copper cables used to transmit data. PoE+ media converters are Power Sourcing Equipment (PSE). This AC powered media converter combines data received over a fiber optic link with 56 VDC power to provide power and data to Powered Devices (PD) over unshielded twisted pair cabling while complying with IEEE802.3at PoE+ and also backwards compatible with IEEEE802.3af standard PoE.
The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection, and fault protection input. Link Pass Through and remote fault detect allows the media converter to monitor both the fiber and the copper ports for the loss of a receive (RX) signal and propagate the failure on to the end devices.
PoE allows for the transmission of power over the same copper cables used to transmit data. PoE+ media converters are Power Sourcing Equipment (PSE). This AC powered media converter combines data received over a fiber optic link with 56 VDC power to provide power and data to Powered Devices (PD) over unshielded twisted pair cabling while complying with IEEE802.3at PoE+ and also backwards compatible with IEEEE802.3af standard PoE.
The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection, and fault protection input. Link Pass Through and remote fault detect allows the media converter to monitor both the fiber and the copper ports for the loss of a receive (RX) signal and propagate the failure on to the end devices.