Transition - transceiver - Fast Ethernet
Mfg # E-100BTX-FX-05-EU
CDW # 357112
| UNSPSC 43201553
Know your gear
Making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before
With Transition Networks' Full-Featured 100BaseTX to 100BaseFX Media Converter, cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks is easier than ever before.
It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. It also automatically detects faults in a link using Remote Fault Detection. This feature allows you to troubleshoot a fault, even if it is only in one direction, via a pulse to the link signal on the transmit side of the same connection; alerting the remote device on the same side as the failure. User-selectable option to select half- or full-duplex modes, because 100BaseFX does not allow for auto-negotiation between half or full-duplex modes, the ability to select this manually is critical; ensuring proper use of CSMA/CD Media Access Control. Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration.
It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. It also automatically detects faults in a link using Remote Fault Detection. This feature allows you to troubleshoot a fault, even if it is only in one direction, via a pulse to the link signal on the transmit side of the same connection; alerting the remote device on the same side as the failure. User-selectable option to select half- or full-duplex modes, because 100BaseFX does not allow for auto-negotiation between half or full-duplex modes, the ability to select this manually is critical; ensuring proper use of CSMA/CD Media Access Control. Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration.