C2G RAPIDRUN DIG HDMI VOLTAGE INS
Mfg # 42223
CDW # 1698729
Know your gear
Enhance your purchase
C2G USB Powered HDMI Voltage Inserter - power adapter is rated4.33 out of5 by3.
Rated 5 out of 5 byATS-Lakewood from Worked when almost all hope was lost.So I have a complicated HDMI setup in one of my church buildings. (wall plate -> 45 ft cable -> HDMI auto switch #40349 -> 1ft HDMI cable -> HDMI splitter -> 100ft HDMI cable to projector.) Without the voltage inserters, this projector would have never gotten off of the ground. I have placed 3 voltage inserters in this configuration. (One inside each wall plate, and one prior to going to the projector), I get CRYSTAL CLEAR picture without any problems. BTW the other leg of the splitter goes to an HDMI to SDI adapter which then goes to a computer. Love the products from C2G, high-quality stuff for not a lot of $$$.If you are running a long cable run, put one of these near the source and you will have a lot more stable of a connection.
Date published: 2015-10-09T00:00:00-04:00
Rated 5 out of 5 byCompTech from Works as it shouldWe've purchased a number of these to power fiber optic HDMI cables which have an issue in longer lengths with the HDMI output of the source device not having enough current to power the transmitting circuitry. They've worked like a charm so far with not visible issues.
Date published: 2011-12-31T00:00:00-05:00
Rated 5 out of 5 byJoe-Bob from Will not permit 1080p with 1080i CableTried to use this to fix an incompatibility issue with the Rapid Run Digital cable and a 1080i setting on a projector. In 2008, Rapid Run Digital cable was not rated for 1080i, so be sure to verify your interface before ordering. There should now be a 1080i Rapid Run offering.
Date published: 2009-05-17T00:00:00-04:00