Produce gallery-quality, saleable prints come with this 10-ink A3+ photo printer. It offers outstanding professional prints in color and monochrome, versatile media support and enhanced connectivity.
The PIXMA PRO-10 has three dedicated monochrome inks, allowing you to create beautiful black and white photos with smooth tonal gradations. The matte black and photo black inks are always available to print, ensuring you don't waste ink by changing photo paper from glossy to matte. PIXMA PRO-10 has a FINE technology print head with 4 pl ink droplets, delivering up to 4800 dpi print resolution for highly detailed, grain-free photos. You can print bordered A3+ gallery-quality color or a black and white print in less than four minutes.
Canon PIXMA PRO-10 - printer - color - ink-jet is rated3.76 out of5 by29.
Rated 5 out of 5 byBert from ownerI would only suggest same quality but less expensive inks!
Date published: 2013-09-03T00:00:00-04:00
Rated 5 out of 5 byGenea from Print head problemsJust a few notes for those who have problems with the print heads. . I have been a canon user for decades. They are usually a great printer and are the most user friendly. Sadly Canon and other MFgs. quit making rear paper feeders for a few years but there is a ned for more of them. Any printer has print head problems as the ink drys and clogs within the nozzels. Canon is one of the few mfgs that have replaceable print heads. (Which is good,) However, before you replace an expensive print head remove it and clean both sides with warm water and soap (wash and rinse until no ink color runs out from any position . ( Yes ....you can wash electronic devices with plain soap and water...BUT THEY HAVE TO BE COMPLETLY DRY BEFORE USING THEM .... but don't bother using any chemicals as they can ruin components or leave conductive residues .. plain water is your best cleaner as one company I worked for found out after many experiments with many other chemicals and ultrasound ...) I have used soap and water to clean hundreds of electronic devices and recently cleaned a print head on an old PIXMA MX860 which is no longer made and parts are unavailable. ,,,, just make sure you rinse off any residue with plain water and dry them very well by gently blowing out any water and not using them for days so they can dry thoroughly . Do not use a hair dryer to dry them as the air is TOO HOT and can damage some things. .. and you can also set them in direct sunlight for a hour or so to help them to dry . When you deep clean the heads a pad soaks up the ink and gets saturated over time and no longer works and after a while cannot clean dried clogged jets. and just ends up just soaking up the ink from your ink tanks. Unfortunately, the pad is hard to get to and hard to replace , and may not be available from canon. Usually my canon printers need repaired not long after canon no longer makes that model and no parts are available. Authorized repair shops in my area also do not carry any parts.
Date published: 2016-10-28T00:00:00-04:00
Rated 5 out of 5 byUnhappyCust from HORRIBLEThis printer is so complicated to use it takes me hours to print the simplest things and I am usually frustrated to tears when using this product. It was so expensive and it never works right, I am miserable over this purchase.
Date published: 2015-12-19T00:00:00-05:00
Rated 5 out of 5 bymackart from Gallery quality printsI have this printer for about two weeks. It has performed Great in the print quality is outstanding. Compared to my old Pro 9000 the contrasts, Color corrections and depth of color are absolutely superb. As a matter of fact after printing a few Photos I have shared with the professional printing company they made the comment well I guess I won’t be seeing you much anymore. The software application for printing namely, print studio Pro for fine-tuning your photos prior to printing is both amazing and comprehensive. Print studio Pro is much more comprehensive than the old software easy photo print EX then I used with my pro 9000. Hello I am giving this printer and a five star rating I think it’s important to mention the following caveat. I am using a 27inch iMac and IOS software along with a wireless mouse. Upon trying to initiate and work with print studio Pro in the print parameters. Upon calling Canon technical support the two times I called they could not address the issue. The third call to Canada to support Perez provided a result of the issue which was the inability of a wireless mouse to interface with print studio Pro and its options. After using my Wacom tablet and stylus as a tool to interface with print studio pro all functions to studio were active. So if there’re any users of the Canon Pro 10 and they’re having difficulty with this you might try to use a wired mouse. The other Factor I might make note of is the Canon support. In my contacting can support multiple times I have found them to be accommodating, knowledgeable and polite. The other Factor which I feel is important is the technical support is based in the USA, which , in my case, provides dialogue that is easier to understand. Based on the technical support I’ve received the product quality an inherent longevity this printer is highly recommended as a good value and wise investment.
Date published: 2018-03-15T00:00:00-04:00
Rated 5 out of 5 byF_J_Woods from It buzzes, it whirrs, it works.This printer scared me the first few times I used it. It is a living, breathing creature that makes spontaneous noises that you have no control over. It clicks, it taps, it whirrs. Once you accept that, you will likely love this printer. I've read many of the other reviews about clogged nozzles, jamming errors, alignment problems, etc. I bought this printer USED, have shipped it intercontinentally for moves, and have let it sit unused for months on end. It still works flawlessly, years later.Maybe I'm just lucky. But, it is what it is. This is a fantastic printer.
Date published: 2019-03-18T00:00:00-04:00
Rated 5 out of 5 byEPR from Great When It PrintsWhen the printer prints - it does a great job. It is really inconsistent and at times a challenge to use with photoshop and print shop pro
Date published: 2016-06-11T00:00:00-04:00
Rated 5 out of 5 byMelvinC from Great qualityHaven't had this printer very long so can not speak about durability. However the quality is amazing. The photos I've printed so far are very much professional looking. The operating cost isn't cheap but its a trade off for the fine quality and convenience. All inks and supplies are available locally for me.
Date published: 2013-05-12T00:00:00-04:00
Rated 5 out of 5 bynoMore from Unbelievable ProblemsMy Pro-10 has been nothing short of an equipment nightmare. First the Wi-Fi connection was next to impossible without customer support,who are not around on the weekends. Next the software glitches left me wanting to throw the print out the window.
Date published: 2016-12-21T00:00:00-05:00
Rated 5 out of 5 byKalico from Best buy everI love this printer.I take wildlife photos and own a pet sitting service so I also take photos of my little clinets. The highest quality prints ever.To capture the look in the eyes of my clinets and the feathers on the birds of prey that I handle is awesome. Thank You Canon
Date published: 2014-12-10T00:00:00-05:00
Rated 5 out of 5 byNJSully72 from Excellent printer so far.This CANON PIXMA PRO-10 was awesome buy at time I bought it with my Canon 5D Mark IV kit.
Date published: 2017-08-17T00:00:00-04:00
Rated 5 out of 5 byBig Ant TV NYC from awesome printer 2nd great pixma i boughtthis printer is a big beastwell made, bigger theni thought its super heavyi live in nyc/nj area lugging this too the subway was a workoutliterallygreat colors fast printingall thats missing is a SD card slot and nice big touch screen for easier use
Date published: 2015-04-04T00:00:00-04:00
Rated 5 out of 5 bySTM59 from Very Poor Performance - Not Ready for Prime TimeI have had this printer for 3 years now and can in all honesty say that it is without doubt the most unreliable, and most ink-expensive, and therefore most frustrating printer that I have ever owned (and I have owned quite a few). It is very user un-friendly, very difficult to troubleshoot, very slow and can never be counted on to perform as requested without a great deal of intervention. I am constantly having to deal with flashing lights indicating some error or issue. I would expect FAR, FAR better from a printer that cost this much to buy and operate. If I could give it 0 stars, I would.
Date published: 2016-10-28T00:00:00-04:00
Rated 5 out of 5 byfrankincalif from Great Photos, when it worksI have owned 3 of these printers, after some time everyone delivers a message, JAMMED but there is no jam. Extremely frustrating and spend hours and hours on each printer, but finally I am done
Date published: 2018-07-09T00:00:00-04:00
Rated 5 out of 5 byBuzz from No 11x14 paper settingFantastic printer! The best I've owned, however, it does not have an 11x14 paper setting. This size is a favorite of my clients and a standard portfolio size, what gives?
Date published: 2015-03-01T00:00:00-05:00
Rated 5 out of 5 bycuda719 from Superb Printer/Great price right nowThis is printer has a large footprint, the setup time is a little on the slow side. Be sure to calibrate your monitor, the results are outstanding. My prints look like they came from a pro lab. Ink usage seems normal just print one picture a week and there seems to be no cleaning cycle that wastes ink.
Date published: 2014-02-21T00:00:00-05:00
Rated 5 out of 5 bySlim from Should purchased long ageI have had my PRO 10 now for 3 months. I am telling you I have spent more than a grand on nickel and dime color printers over the years. I finally said enough already and purchased the PRO 10. Wow ... as long as you are using quality paper to print on you are fine. This printer does not like cheap photo paper. Even my wife is impressed with the quality and she always finds fault in everything, especially, me. Get one and become a grown man ... or woman.
Date published: 2014-06-04T00:00:00-04:00
Rated 5 out of 5 byholdercom from Awful PrinterProblems with setting up drivers, using a mac, then main feeder will not work, manual feeder does only to find color is not true to photoshop, not even close.
Date published: 2018-10-27T00:00:00-04:00
Rated 5 out of 5 byDirtydawg1956 from WOW!!!!I bought this printer a few months ago. I used it to print photos at my church for 42 kids. It did a great job as printing DVD labels and 4x6 pictures. I also live on the east coast and my family lives on the west coast. This is how I keep my family members in touch with photos of my daughter.
Date published: 2017-12-24T00:00:00-05:00
Rated 5 out of 5 byTinisha from Great QualityI purchased this about two years ago. I absolutely love the quality of large prints, however, if not used routinely, the print head will dry up. My printer is no longer usable because I didn't use it for about a month and left it unplugged. Only purchase if you plan to use regularly.
Date published: 2017-10-02T00:00:00-04:00
Rated 5 out of 5 byphoto Lea from Color is AWESOME !I purchased the PRO-10 several months ago. I printed a couple small photos once I set it up and then it has sat for a few months. Once I powered on the printer and let it warm up for a couple minutes, I printed 1/2 dozen 5 X 7 prints which look AWESOME. I did not have the clogged head as some experienced and getting prints the first time from 2 different photo software programs wasn't hard to do. I take pride in my photos and take multiple photos of the same subject to ensure I get a photo worthy of printing. Doing an update or two to the printer's setup is no big deal to me.
Date published: 2016-11-28T00:00:00-05:00
Rated 5 out of 5 byEspy from Love this printer!Bought the Pixma Pro 10 right before Christmas.I have wanted one for 3 years and finally decided toGo for it.It was easy to set up and load the ink cartridges.Only took a few minutes for it to go through the setup procedure.I have a lot of high quality pics that I have taken with my 5D markii, and as soon as it was ready I started printing.Totally amazed at the print quality!I was so blown away I ended up printing 7 13x19,And 14 8/12x11 prints. They all printed in framing quality.I just cant say enough about this printer.
Date published: 2017-01-11T00:00:00-05:00
Rated 5 out of 5 byJames Unique Nickname from More trouble than it's worth.Despite getting a great deal on this printer, it has NOT been worth it. The software on the included disc was already outdated. Once I realized what was wrong, I had to search the web for a newer version. The new version still didn't install correctly, and is not compatible with Adobe software on a Mac. The print process either errors out or results in wildly distorted images. Waste of money.
Date published: 2017-11-14T00:00:00-05:00
Rated 5 out of 5 by512portaitcompany from Print at home with Pro lab resultsI am a working 20 year+ professional portrait photographer. I use ProDPi for the bulk of my printing needs. I wanted to be able to print some smaller jobs from my home office. I purchased the Pro-10 off of craigslist for 200.00 almost new and the original owner had printed a few images. I had zero problems setting it up. Downloaded a few drivers for my Mac and had it up and running quickly. It produces lab quality images.However, it is slow. It took almost 3 hours to print 40 8x10 composite images. It is an ink hog. I have used 3 full sets+ of ink in six months. Chrome Optimizer seems to go the quickest so i have to always have a few extra tanks on hand. It is a pro printer so only pro camera shops carry the ink. Big Box Office stores do not stock this ink. This is hassle for me because the closest retailer is over an hour away. It uses a ton of ink on start up to prime the heads, so i try to print something every week just to keep it the jets from getting clogged with dried ink. The ink is not cheap, but does deliver the archival quality that I need. It does need some baby sitting while doing a job. It does stop from time to time during a large print job due to ink tanks needing to be replaced. The warning indicators flash a series of flashes to indicate its needs. I just open a Canon knowledge page for the code warning meanings, the fix is always something simple. It does require a certain amount of patience (photographer have to a patient bunch anyway). I print up to 11x14's on it and it always deliver a very high quality print, just don't be in a hurry and have plenty of extra ink on hand ( I have at two full sets to avoid driving or waiting on amazon. I would buy Canon anytime.
Date published: 2017-05-25T00:00:00-04:00
Rated 5 out of 5 byMLO from Some issuesI just bought this printer on December 30, 2015... Easy set up, but wifi doesn't work... I cannot use any of Canon's printing software with Aperture, as Canon states, it works with ALL Adobe products, so I had to purchase Adobe Elements 14, well it doesn't work with that either... It tells me I don't have Adobe products installed... This is absurd
Date published: 2016-01-04T00:00:00-05:00
Rated 5 out of 5 byGotInkGoPrint from Instant ResultsThe first b/w 13x19 prints I made with the Pro-10 are stunning! They brought compliments from some other very accomplished photographers at a recent display of work. I may be tempted to shut down my wet darkroom if I continue to get this kind of result. The Pro-10 was an upgrade from a much older 13x19 printer of another make that couldn't come near the b/w results of the Canon Pro-10.
Date published: 2014-11-18T00:00:00-05:00
Rated 5 out of 5 bycybersis from Your'e going to put my printshop out of business?I seen this printer at Christmas time - it was on sale ... with the rebate. That's a deal I could not pass up and have not regretted it since! The guy behind the photo print counter said.. you're going to put me out of business. lol A great printer!
Date published: 2018-03-06T00:00:00-05:00
Rated 5 out of 5 byRey90 from Printer MalfunctionPrinter malfunction after a couple of printouts. Now it’s totally dead.
Date published: 2019-03-21T00:00:00-04:00
Rated 5 out of 5 bydocusync from A workhorseBought this printer in 2015 in a local Fry's. Used it a lot to print family pictures and occasionally some stuff for friends. Still running like new. Never got clogged nozzles. It takes some ink (and time to run a clean up when the printer wasn't in use for a while, but every ink-jet does it. Great job Canon.
Date published: 2018-12-14T00:00:00-05:00
Rated 5 out of 5 byMountaineer from Great printerHave been using my printer ever day for nine months. It has been producing great quality images—black and white and color. No problems! It isn’t a fast printer, but I’m printing large images and not xeroxing, collating, and stapling them together. I want quality prints, and I’ve been getting them with the Pro-10!