Quick tech specs
  • TAP M Series TAP-M506A
  • 40 Gigabit LAN
  • 40GBASE-BiDi
  • 4 ports
  • for G-TAP M Series TAP-M100T
  • Tap splitter
  • 100 Gigabit Ethernet
  • 100GBASE-BiDi
  • 840-910 nm
  • TAP-M200
View All

Know your gear

The G-TAP M Series is variety of passive fiber optical TAPs, for high density, lower density and unidirectional deployments, that require no power source to operate. By splitting the light optically, the G-TAP M Series enables network operators to passively monitor full duplex fiber optic links, without impacting network traffic. With the high-density family, up to 18 full duplex links can be tapped in a ½ RU space and up to 36 full duplex links can be tapped in a 1 RU space, allowing for more visibility with less space and lower costs. There is a "LT" family for easier deployment in lower density situations. There is also a "ULT" family (see the G-TAP M Series Unidirectional TAP Family data sheet) specifically designed to provide additional no-return path isolation to prevent signals that might be maliciously or accidentally transmitted into the monitor port of the TAP from entering or disrupting the network. Also available is a family of breakout panels for where these are needed.

The G-TAP M Series utilizes advanced thin-film technology to minimize insertion loss and maximize consistency across optics types and optical transceiver vendors when deploying within the narrow optical budgets of fiber (especially multimode) networks. High-capacity 10 gigabit networks require a tapping solution with the highest possible density and quality to detect security threats and performance issues throughout the network. No special cabling or patch cords are required, even for 40Gb and 100Gb deployments.

The G-TAP M Series is a modular platform with the choice of a ½ RU or 1 RU rack-mountable chassis that hold up to three (3) or six (6) TAP modules, respectively. Each TAP module supports up to six network links, depending on the model. A range of multimode (MM) and single mode (SM) as well as 50/50, 60/40 and 70/30 split ratios are available. The modularity not only provides flexibility in choosing link speed, fiber type, split ratio, and density, but also facilitates continued network visibility for performance monitoring and security with future optical network technologies.

The patch panel modules convert a single 40Gb or 100Gb MPO link into four 10Gb or 25Gb LC links (and vice versa) and are a convenient, organized alternative to using breakout cables: simply connect a normal MPO-12 patch cord from the 40Gb QSFP+ or 100Gb transceiver to the patch panel.
Availability: In Stock

Enhance your hardware

Add Warranty

Better Together

Gigamon G-TAP M Series TAP-M506A - tap splitter - 40 Gigabit LAN, 100 Gigab
Quick View
Total Price: