Tripp Lite Smart Pro 5000VA Intl Rackmount UPS Line-Interactive 5kVA 230V

Mfg.Part: SMX5000XLRT3U | CDW Part: 858175 | UNSPSC: 39121011
Availability: In Stock
Warranties
Was $3,363.00
$2,033.89 Advertised Price
Advertised Price
Lease Option ($60.00/month) Lease Price Information
Note: Leasing is available to organizations only. Leasing is not available to individuals.
Product Details
  • 5000va
  • 3u
  • extended run
  • 11 outlets (3 C19
  • 8 C13)
  • Multiple interfaces
  • USB
View Full Product Details
Better Together
Tripp Lite Smart Pro 5000VA Intl Rackmount UPS Line-Interactive 5kVA 230V
Quick View
Total Price:

Product Overview

Main Features
  • 5000va
  • 3u
  • extended run
  • 11 outlets (3 C19
  • 8 C13)
  • Multiple interfaces
  • USB
  • DB9 (serial & contact closure)
  • SNMPWEBCARD Slot
KEY POINTS
5000VA / 3750 watt max. output power capacity compatible with International 230V 50/60Hz input voltage

3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 75 cm

Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges

Line Interactive Automatic Voltage Regulation (AVR) corrects 230V nominal input from 170 to 282VAC back to usable 230V levels without consuming battery power

AVR circuits boost undervoltages from 170 to 199V by 12% and reduce overvoltages from 245 to 282V by 12%

Network interfaces support simultaneous communications via USB, DB9 serial or contact closure and SNMPWEBCARD slot

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP

Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff and activate self-test

Built-in Emergency Power Off (EPO) interface with cable

Sine wave output in AC and battery mode

Expandable runtime with optional BP48V60RT3U external battery packs

Half/full load runtime of 27 / 10 minutes with internal batteries

Includes 11 output receptacles (3 C19 / 8 C13)

Hardwire input AC connection

3 stage metered LEDs offer current monitoring and battery charge level

Mains power and voltage regulation LEDs offer at-a-glance power status information

Front panel switches support self-test and alarm cancel functions

Included adjustable mounting rails support installation in 4 post 19 inch racks

Supports 2 post rackmount installation with optional 2POSTRMKIT accessory

Supports upright tower placement with optional 2-9USTAND accessory

CE, GOST, SASO listed

2 year manufacturer's product warranty

TYPICAL APPLICATIONS
Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

PACKAGE INCLUDES
SMX5000XLRT3U UPS system
PowerAlert Software and Cabling
Mounting hardware for 4 post rackmount installation
Warranty information
Instruction manual



Tripp Lite Smart Pro 5000VA Intl Rackmount UPS Line-Interactive 5kVA 230V is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from i would buy this product and recommend very good.and easy to use
Date published: 2017-12-02
Rated 4 out of 5 by from I have installed 4 of these in 2 racks. One of them had a bad battery pack that exposed itself 3 weeks after initial installation. Tech support sent another pack out, a little slower than my liking, I believe it was 4-5 days. I had it coupled with the PDUMH15ATNET, which allows you to take advantage of two UPS devices from single PSU appliances (like switches, routers, etc) and did not have any issues with switching to avoid power disruption to those devices. I did have to connect the devices from the unit with the dead battery pack to a couple workstation APC 1500va UPSs while I waited for the new battery pack, as the device is apparently designed to not power on if the battery is dead/faulty. Mostly why I gave it 4 stars...The fit and finish leaves a bit to be desired (especially compared to APC) but these are significantly cheaper. You can expand the capacity/run-time with daisy-chainable packs, which allows for flexibility for expansion. And after running them for almost 2 years, I have not experienced any other issues. Make sure you get the snmp webcard for monitoring, alerts and control of the unit.Note: When powering them on, only hold the power button until you hear the beep. If you hold longer than the beep, they won't power on. Not sure why or who thought this was a good idea.
Date published: 2013-05-21
Rated 5 out of 5 by from Good UPS to buy Nice looking, easy use and good designit always keep you from any power event, reliable product & brand
Date published: 2012-12-26
  • y_2018, m_10, d_19, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_858175, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_cdwg