Viking K-2000-DVA - auto dialer
$648.00
$407.97
Mfg # K-2000-DVA
CDW # 1291017
Know your gear
Viking’s K-2000-DVA is a fully programmable multi-input, multinumber auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000- DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to 1 minute in length specific to that input.
Messages can be recorded locally or remotely with a total message time for all 8 inputs of eight minutes. When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection.
The K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.
Programming can be done with a Touch Tone phone or using a PC with a serial port connection and software available on the Viking website: http://www.vikingelectronics.com.
Applications:
Alarm Dialer
- Security/burglar/fire alarm notification
- System alarm or equipment malfunction notification
- Environmental warning notification
- Automatic telephone messaging paging
Store Caster
- Provide assistance or promotional announcements in department stores, grocery stores, hardware stores, gas stations, etc.
Features:
Non-volatile memory (no batteries required)
Stores up to eight 32-digit numbers (sixty four 32-digit numbers total)
8 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Eight inputs programmable as normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Programmable resume timer for each input (time following reset for input to become active again)
Call progress detection
Programmable ringback limit for call progress
Remote security and access codes
Store caster mode
Local or remote programming and recording
RS-232 port for programming via a PC
Compatible with the RC-2A and RC-3 remote DTMF controllers
One year warranty
Made in the USA
Messages can be recorded locally or remotely with a total message time for all 8 inputs of eight minutes. When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection.
The K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.
Programming can be done with a Touch Tone phone or using a PC with a serial port connection and software available on the Viking website: http://www.vikingelectronics.com.
Applications:
Alarm Dialer
- Security/burglar/fire alarm notification
- System alarm or equipment malfunction notification
- Environmental warning notification
- Automatic telephone messaging paging
Store Caster
- Provide assistance or promotional announcements in department stores, grocery stores, hardware stores, gas stations, etc.
Features:
Non-volatile memory (no batteries required)
Stores up to eight 32-digit numbers (sixty four 32-digit numbers total)
8 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Eight inputs programmable as normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Programmable resume timer for each input (time following reset for input to become active again)
Call progress detection
Programmable ringback limit for call progress
Remote security and access codes
Store caster mode
Local or remote programming and recording
RS-232 port for programming via a PC
Compatible with the RC-2A and RC-3 remote DTMF controllers
One year warranty
Made in the USA
Add to Compare